School Bus Fleet Magazine Forums
Home | Profile | Register | Active Topics | Members | Search | FAQ
 All Forums
 Management/Operations
 Enter Forum: Management/Operations
 Equipment Bids
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Thomas Ford 85-16
Top Member

USA
4177 Posts

Posted - 04/01/2002 :  09:50:39 AM  Show Profile  Visit Thomas Ford 85-16's Homepage  Send Thomas Ford 85-16 an AOL message  Reply with Quote
Does anyone have any templates for making a sheet for a bid for equipment to send to certain distributors? How do bids work? I'd like to have some distributors make a "bid" for prices on the equipment I'd like for my bus. I was trying to order some LEDs from CRS, but they won't sell to an individual since they won't be buying in bulk. So, I was going to send bids to some of their distributors in the USA to look professional and also find the best deal. Thanks!

Stop at: http://www.buses.cjb.net
Forums: http://thebusboy.proboards2.com

Quote:
"The pacifist's task today is to find a method of helping and healing which provides a revolutionary constructive substitute for war."
-Vera Brittain

wagonmaster
Top Member

USA
2298 Posts

Posted - 04/01/2002 :  12:50:28 PM  Show Profile  Reply with Quote
Bus Boy,
I think you'd be better served to buy off of an existing bid from a current customer of a bus that you like to buy. That may be easier said than done, but I think if you bid only one bus out that you may not get them to respond. That is especially true if you plan to deviate from the "norm" in terms of equipment and specifications. Don't get me wrong, I hope everyone bids for you, I just don't see it happening.
Joe



Edited by - wagonmaster on 04/01/2002 12:51:07 PM
Go to Top of Page

Thomas Ford 85-16
Top Member

USA
4177 Posts

Posted - 04/01/2002 :  12:56:48 PM  Show Profile  Visit Thomas Ford 85-16's Homepage  Send Thomas Ford 85-16 an AOL message  Reply with Quote
No, they may not reply, but it's worth a try! I have other alternatives, but I'd like to try this just to see what happens. Is there a certain way most bids are written up? I'm not sure if I'm even describing this all right... lol

Stop at: http://www.buses.cjb.net
Forums: http://thebusboy.proboards2.com

Quote:
"The pacifist's task today is to find a method of helping and healing which provides a revolutionary constructive substitute for war."
-Vera Brittain
Go to Top of Page

Thomas Ford 85-16
Top Member

USA
4177 Posts

Posted - 04/01/2002 :  1:01:41 PM  Show Profile  Visit Thomas Ford 85-16's Homepage  Send Thomas Ford 85-16 an AOL message  Reply with Quote
Keep in mind that I may be misunderstanding the whole thing here... Or may be thinking of a completely different thing.

Stop at: http://www.buses.cjb.net
Forums: http://thebusboy.proboards2.com

Quote:
"The pacifist's task today is to find a method of helping and healing which provides a revolutionary constructive substitute for war."
-Vera Brittain
Go to Top of Page

Thomasbus24
Administrator

USA
4559 Posts

Posted - 04/06/2002 :  1:30:49 PM  Show Profile  Reply with Quote
Are you just looking to bid out parts or an entire bus? I'm not sure I'm reading this right.

If you want parts prices, I would highly recommend you go to an aftermarket supplier for things like lights, switches, seat covers and so on. They have always been cheaper than our bus distributors, and they usually will sell to anybody. Prices generally are set , unless you are buying mass quantity, then they might come down a bit. Just ask the price and they will tell.

Now if you want to bid an entire bus...well...that's a different story! if you go to www.wardbuses.com you can find a pre-fab bid sheet for different International buses.

Yes, that's my bus.
No, you can't drive it.
Go to Top of Page

Thomas Ford 85-16
Top Member

USA
4177 Posts

Posted - 04/06/2002 :  1:42:10 PM  Show Profile  Visit Thomas Ford 85-16's Homepage  Send Thomas Ford 85-16 an AOL message  Reply with Quote
quote:

Are you just looking to bid out parts or an entire bus? I'm not sure I'm reading this right.

If you want parts prices, I would highly recommend you go to an aftermarket supplier for things like lights, switches, seat covers and so on. They have always been cheaper than our bus distributors, and they usually will sell to anybody. Prices generally are set , unless you are buying mass quantity, then they might come down a bit. Just ask the price and they will tell.

Now if you want to bid an entire bus...well...that's a different story! if you go to www.wardbuses.com you can find a pre-fab bid sheet for different International buses.

Yes, that's my bus.
No, you can't drive it.


Just parts. I've decided against it, but hey, it was worth a try. I'm just gonna try to find the products somewhere since the company won't sell them to me.

Stop at: http://www.buses.cjb.net
Forums: http://thebusboy.proboards2.com

Quote:
"The pacifist's task today is to find a method of helping and healing which provides a revolutionary constructive substitute for war."
-Vera Brittain
Go to Top of Page

BusBoy
Top Member

USA
2042 Posts

Posted - 04/08/2002 :  08:38:15 AM  Show Profile  Visit BusBoy's Homepage  Reply with Quote
Hey Mike,

I used to sell School Buses and mite have an old spec sheet! If I find one I'll e-mail you.

Kevin

Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
 


School Bus Fleet Magazine Forums © 2022 School Bus Fleet Magazine Go To Top Of Page
This page was generated in 0.53 seconds. Snitz Forums 2000