I have a 2019 Vision ISB 6.7 77,00 miles engine#7425787 setting code 5898 engine misfire cylinder 4 it runs good no strange noises I have cleaned the exhaust gas pressure tube and it has a new oem sensor adjusted the valves updated the ecm hc80283.11 it passed the air handling and injector performance test. I swapped 4 and 3 injectors. I checked the fuel pressure. and cleaned egr differential ports no improvement any advice would be appreciated
did the code follow the injector or stay in hole#4 if it followed then its an injector if it stayed then its electrical, if its inactive put the fuel conditioner to it and drive it , if it stays on the back roads drive it in drive and not overdrive so the rpms stay up
OEM trained in wiring and all engine platforms for over 20 years